Nuclear autoantigenic sperm protein facilitates glioblastoma progression and radioresistance by regulating the ANXA2/STAT3 axis.

AIMS: Although radiotherapy is a core treatment modality for various human cancers, including glioblastoma multiforme (GBM), its clinical effects are often limited by radioresistance. The specific molecular mechanisms underlying radioresistance are largely unknown, and the reduction of radioresistance is an unresolved challenge in GBM research. METHODS: We analyzed and verified the expression of nuclear autoantigenic sperm protein (NASP) in gliomas and its relationship with patient prognosis. We also explored the function of NASP in GBM cell lines. We performed further mechanistic experiments to investigate the mechanisms by which NASP facilitates GBM progression and radioresistance. An intracranial mouse model was used to verify the effectiveness of combination therapy. RESULTS: NASP was highly expressed in gliomas, and its expression was negatively correlated with the prognosis of glioma. Functionally, NASP facilitated GBM cell proliferation, migration, invasion, and radioresistance. Mechanistically, NASP interacted directly with annexin A2 (ANXA2) and promoted its nuclear localization, which may have been mediated by phospho-annexin A2 (Tyr23). The NASP/ANXA2 axis was involved in DNA damage repair after radiotherapy, which explains the radioresistance of GBM cells that highly express NASP. NASP overexpression significantly activated the signal transducer and activator of transcription 3 (STAT3) signaling pathway. The combination of WP1066 (a STAT3 pathway inhibitor) and radiotherapy significantly inhibited GBM growth in vitro and in vivo. CONCLUSION: Our findings indicate that NASP may serve as a potential biomarker of GBM radioresistance and has important implications for improving clinical radiotherapy.

High-Frequency AC Heating Strategy of Electric Vehicle Power Battery Pack in Low-Temperature Environment.

In this paper, a heating strategy using high-frequency alternating current (AC) is proposed to internally heat lithium-ion batteries (LIB) at low temperatures. The strategy aims to strike a good balance between rapid heating of the battery at low temperatures and minimizing damage to the battery's lifespan without the need for an additional power source. The strategy presents an electrochemical-thermal coupling model to simulate and predict the temperature rise and temperature distribution of a 50 A h LiFePO4 square battery at different C-rates, the effect of high-frequency AC on battery life, and the validity of the model as verified by experiments. The experimental and simulation results show that this strategy can achieve faster heating speeds and better temperature consistency without affecting battery life. The best heating effect can be achieved at a frequency of 500 Hz (4.2C), and the temperature of the battery rises from 253.15 to 278.15 K within 365 s, for an average heating rate of 3.29 K/min. Researching low-temperature AC heating methods has important value for energy conservation because it can improve heating efficiency, expand application areas, promote technological innovation, and enhance product quality.

Radiomic profiling for insular diffuse glioma stratification with distinct biologic pathway activities.

Current literature emphasizes surgical complexities and customized resection for managing insular gliomas; however, radiogenomic investigations into prognostic radiomic traits remain limited. We aimed to develop and validate a radiomic model using multiparametric magnetic resonance imaging (MRI) for prognostic prediction and to reveal the underlying biological mechanisms. Radiomic features from preoperative MRI were utilized to develop and validate a radiomic risk signature (RRS) for insular gliomas, validated through paired MRI and RNA-seq data (N = 39), to identify core pathways underlying the RRS and individual prognostic radiomic features. An 18-feature-based RRS was established for overall survival (OS) prediction. Gene set enrichment analysis (GSEA) and weighted gene coexpression network analysis (WGCNA) were used to identify intersectional pathways. In total, 364 patients with insular gliomas (training set, N = 295; validation set, N = 69) were enrolled. RRS was significantly associated with insular glioma OS (log-rank p = 0.00058; HR = 3.595, 95% CI:1.636-7.898) in the validation set. The radiomic-pathological-clinical model (R-P-CM) displayed enhanced reliability and accuracy in prognostic prediction. The radiogenomic analysis revealed 322 intersectional pathways through GSEA and WGCNA fusion; 13 prognostic radiomic features were significantly correlated with these intersectional pathways. The RRS demonstrated independent predictive value for insular glioma prognosis compared with established clinical and pathological profiles. The biological basis for prognostic radiomic indicators includes immune, proliferative, migratory, metabolic, and cellular biological function-related pathways.

Telluride-Based Materials: A Promising Route for High Performance Supercapacitors.

As supercapacitor (SC) technology continues to evolve, there is a growing need for electrode materials with high energy/power densities and cycling stability. However, research and development of electrode materials with such characteristics is essential for commercialization the SC. To meet this demand, the development of superior electrode materials has become an increasingly critical step. The electrochemical performance of SCs is greatly influenced by various factors such as the reaction mechanism, crystal structure, and kinetics of electron/ion transfer in the electrodes, which have been challenging to address using previously investigated electrode materials like carbon and metal oxides/sulfides. Recently, tellurium and telluride-based materials have garnered increasing interest in energy storage technology owing to their high electronic conductivity, favorable crystal structure, and excellent volumetric capacity. This review provides a comprehensive understanding of the fundamental properties and energy storage performance of tellurium- and Te-based materials by introducing their physicochemical properties. First, we elaborate on the significance of tellurides. Next, the charge storage mechanism of functional telluride materials and important synthesis strategies are summarized. Then, research advancements in metal and carbon-based telluride materials, as well as the effectiveness of tellurides for SCs, were analyzed by emphasizing their essential properties and extensive advantages. Finally, the remaining challenges and prospects for improving the telluride-based supercapacitive performance are outlined.

Study on articular surface morphology of atlantoaxial lateral mass based on differential manifold.

OBJECTIVES: To propose a surface reconstruction algorithm based on a differential manifold (a space with local Euclidean space properties), which can be used for processing of clinical images and for modeling of the atlantoaxial joint. To describe the ideal anatomy of the lateral atlantoaxial articular surface by measuring the anatomical data. METHODS: Computed tomography data of 80 healthy subjects who underwent cervical spine examinations at our institution were collected between October 2019 and June 2022, including 46 males and 34 females, aged 37.8 ± 5.1 years (28-59 years). A differential manifold surface reconstruction algorithm was used to generate the model based on DICOM data derived by Vision PACS system. The lateral mass articular surface was measured and compared in terms of its sagittal diameter, transverse diameter, articular surface area, articular curvature and joint space height. RESULTS: There was no statistically significant difference between left and right sides of the measured data in normal adults (P > 0.05). The atlantoaxial articular surface sagittal diameter length was (15.83 ± 1.85) and (16.22 ± 1.57) mm on average, respectively. The transverse diameter length of the articular surface was (16.29 ± 2.16) and (16.49 ± 1.84) mm. The lateral articular surface area was (166.53 ± 7.69) and (174.48 ± 6.73) mm2 and the curvature was (164.03 ± 5.27) and (153.23 ± 9.03)°, respectively. The joint space height was 3.05 ± 0.11mm, respectively. There is an irregular articular space in the lateral mass of atlantoaxial, and both upper and lower surfaces of the articular space are concave. A sagittal plane view shows that the inferior articular surface of the atlas is mainly concave above; however, the superior articular surface of the axis is mainly convex above. In the coronal plane, the inferior articular surface of the atlas is mostly concave above, with most concave vertices located in the medial region, and the superior articular surface of the axis is mainly concave below, with most convex vertices located centrally and laterally. CONCLUSION: A differential manifold algorithm can effectively process atlantoaxial imaging data, fit and control mesh topology, and reconstruct curved surfaces to meet clinical measurement applications with high accuracy and efficiency; the articular surface of the lateral mass of atlantoaxial mass in normal adults has relatively constant sagittal diameter, transverse diameter and area. The distance difference between joint spaces is small, but the shape difference of articular surfaces differs greatly.

Pressure-Activatable Liquid Metal Composites Flexible Sensor with Antifouling and Drag Reduction Functional Surface.

Flexible sensors produced through three-dimensional (3D) printing have exhibited promising results in the context of underwater sensing detection (for applications in navigational vehicles and human activities). However, underwater vehicles and activities such as swimming and diving are highly susceptible to drag, which can cause negative impacts such as reduced speed and increased energy consumption. Additionally, microbial adhesion can shorten the service life of these vehicles. However, natural organisms are able to circumvent such problems, with shark skin offering excellent barrier properties and ruffled papillae providing effective protection against fouling. Here, we show that a sandwich system consisting of a spraying layer, conductive elastomer composite, and encapsulation layer can be printed for multifunctional integrated underwater sensors. The modulated viscoelastic properties of liquid metal form the foundation for printing features, while its pressure-activated properties offer the potential for switchable sensors. An integrated drag reduction and antifouling layer were created by combining the shark skin surface shield scale structure with the lotus leaf surface papillae structure. A 3D-printed flexible sensor was designed using our approach to monitor attitude changes and strain in underwater environments, showcasing its capabilities. Our printed sensors can reduce biological attachment density by more than 50% and reduce underwater drag by 8.6-10.3%.

Superhydrophobic Coatings Composed of Multifunctional Polymers Synthesized Using Successive Modification of Dihydropyrimidin-2(1H)-thione.

Polymer synthesis via multicomponent reactions (MCRs) has opened avenues in polymer chemistry and led to the development of various types of functional polymers. Herein, we developed a strategy to prepare multifunctional polymers via the successive modification of dihydropyrimidin-2(1H)-thione (DHPMT), which can be generated by the tricomponent Biginelli reaction. Four hydrophobic polymers were efficiently prepared by using DHPMT derivatives. These polymers can be dip-coated onto the oxidized copper mesh to obtain superhydrophobic meshes because of the strong attractive forces between the DHPMT derivatives and Cu(II). The optimized mesh has self-cleaning properties and outstanding stability in various liquid environments; it has also been successfully applied for oil/water separation with high separation efficiency and good durability. These results demonstrate that successive modification of DHPMT is a promising method for fabricating multifunctional polymers, which may have applications in polymer chemistry and materials science.

The Detection of Yr Genes in Xinjiang Wheat Cultivars Using Different Molecular Markers.

Wheat stripe rust is a fungal disease caused by Puccinia striiformis f. sp. Tritici (Pst). It significantly impacts wheat yields in Xinjiang, China. Breeding and promoting disease-resistant cultivars carrying disease-resistance genes remains the most cost-effective strategy with which to control the disease. In this study, 17 molecular markers were used to identify Yr5, Yr9, Yr10, Yr15, Yr17, Yr18, Yr26, Yr41, Yr44, and Yr50 in 82 wheat cultivars from Xinjiang. According to the differences in SNP loci, the KASP markers for Yr30, Yr52, Yr78, Yr80, and Yr81 were designed and detected in the same set of 82 wheat cultivars. The results showed that there was a diverse distribution of Yr genes across all wheat cultivars in Xinjiang, and the detection rates of Yr5, Yr15, Yr17, Yr26, Yr41, and Yr50 were the highest, ranging from 74.39% to 98.78%. In addition, Yr5 and Yr15 were prevalent in spring wheat cultivars, with detection rates of 100% and 97.56%, respectively. A substantial 85.37% of wheat cultivars carried at least six or more different combinations of Yr genes. The cultivar Xindong No.15 exhibited the remarkable presence of 11 targeted Yr genes. The pedigree analysis results showed that 33.33% of Xinjiang wheat cultivars shared similar parentage, potentially leading to a loss of resistance against Pst. The results clarified the Yr gene distribution of the Xinjiang wheat cultivars and screened out varieties with a high resistance against Pst.

Radiomic features from multiparametric magnetic resonance imaging predict molecular subgroups of pediatric low-grade gliomas.

BACKGROUND: We aimed to develop machine learning models for prediction of molecular subgroups (low-risk group and intermediate/high-risk group) and molecular marker (KIAA1549-BRAF fusion) of pediatric low-grade gliomas (PLGGs) based on radiomic features extracted from multiparametric MRI. METHODS: 61 patients with PLGGs were included in this retrospective study, which were divided into a training set and an internal validation set at a ratio of 2:1 based on the molecular subgroups or the molecular marker. The patients were classified into low-risk and intermediate/high-risk groups, BRAF fusion positive and negative groups, respectively. We extracted 5929 radiomic features from multiparametric MRI. Thereafter, we removed redundant features, trained random forest models on the training set for predicting the molecular subgroups or the molecular marker, and validated their performance on the internal validation set. The performance of the prediction model was verified by 3-fold cross-validation. RESULTS: We constructed the classification model differentiating low-risk PLGGs from intermediate/high-risk PLGGs using 4 relevant features, with an AUC of 0.833 and an accuracy of 76.2% in the internal validation set. In the prediction model for predicting KIAA1549-BRAF fusion using 4 relevant features, an AUC of 0.818 and an accuracy of 81.0% were achieved in the internal validation set. CONCLUSIONS: The current study demonstrates that MRI radiomics is able to predict molecular subgroups of PLGGs and KIAA1549-BRAF fusion with satisfying sensitivity. TRIAL REGISTRATION: This study was retrospectively registered at clinicaltrials.gov (NCT04217018).

Effect of molecular helical structure on self-growing and damping of single network κ-carrageenan hydrogel.

Molecular helical is ubiquitous in molecular structures, however, the impact of the structure on mechanical properties has yet to be extensively studied. In this study, we synthesized a single network κ-carrageenan (KC) hydrogel with the molecular double helix structure, and elucidated its unique self-enhancing and damping properties from a molecular structural perspective. During cycle tensile tests, the helical structure was stretched and entangled to form a directional arrangement, increasing the elastic modulus and achieving 'self-reinforcement'. Meanwhile, the molecular helices have a spring-like damping effect, allowing the hydrogel to dampen low-frequency noise while transmitting high-frequency signals. By utilizing the hydrogel to create electrodes for electrocardiogram (ECG) detection, we were able to effectively filter out noise generated by movements while retaining necessary signals. Our work thus presents a potential pathway bridging from microscopic molecular structure to macroscopic mechanical properties of materials.

A dual-blocker aided and dual-label-free electrochemical biosensor based on mbHCR/rGO nanocomplexes for ultrasensitive DNA detection.

Heterogeneous electrochemical DNA biosensors have attracted huge attention due to their enhanced signal sensitivity, compared to homogeneous biosensors. However, the high cost of probe labeling and the reduced recognition efficiency associated with current heterogeneous electrochemical biosensors confine their potential applications. In the present work, a dual-blocker assisted and dual-label-free heterogeneous electrochemical strategy based on multi-branched hybridization chain reaction (mbHCR) and reduced graphene oxide (rGO) was fabricated for ultrasensitive detection of DNA. The target DNA could trigger the mbHCR of two DNA hairpin probes, resulting in the generation of multi-branched long chain of DNA duplexes with bidirectional arms. One direction of the multi-branched arms in the mbHCR products were then bound to the label-free capture probe on the gold electrode through multivalent hybridization with enhanced recognition efficiency. The other direction of multi-branched arms in mbHCR product could adsorb rGO via π-π stacking interactions. Two DNA blockers were ingeniously designed to block the binding of excessive H1-pAT on electrode and to prevent the adsorption of rGO by residual unbound capture probes. As a result, with the electrochemical reporter methylene blue selectively intercalated into the long chain of DNA duplex and absorbed on rGO, a remarkable electrochemical signal rise was observed. Thus, a dual-blocker aided and dual-label-free electrochemical strategy for ultrasensitive DNA detection is readily realized with the merit of cost-effective. The as-developed dual-label-free electrochemical biosensor has great potential to be employed in nucleic acid related medical diagnostics.

Improving Noninvasive Classification of Molecular Subtypes of Adult Gliomas With Diffusion-Weighted MR Imaging: An Externally Validated Machine Learning Algorithm.

BACKGROUND: Genetic testing for molecular markers of gliomas sometimes is unavailable because of time-consuming and expensive, even limited tumor specimens or nonsurgery cases. PURPOSE: To train a three-class radiomic model classifying three molecular subtypes including isocitrate dehydrogenase (IDH) mutations and 1p/19q-noncodeleted (IDHmut-noncodel), IDH wild-type (IDHwt), IDH-mutant and 1p/19q-codeleted (IDHmut-codel) of adult gliomas and investigate whether radiomic features from diffusion-weighted imaging (DWI) could bring additive value. STUDY TYPE: Retrospective. POPULATION: A total of 755 patients including 111 IDHmut-noncodel, 571 IDHwt, and 73 IDHmut-codel cases were divided into training (n = 480) and internal validation set (n = 275); 139 patients including 21 IDHmut-noncodel, 104 IDHwt, and 14 IDHmut-codel cases were utilized as external validation set. FIELD STRENGTH/SEQUENCE: A 1.5 T or 3.0 T/multiparametric MRI, including T1-weighted (T1), T1-weighted gadolinium contrast-enhanced (T1c), T2-weighted (T2), fluid attenuated inversion recovery (FLAIR), and DWI. ASSESSMENT: The performance of multiparametric radiomic model (random-forest model) using 22 selected features from T1, T2, FLAIR, T1c images and apparent diffusion coefficient (ADC) maps, and conventional radiomic model using 20 selected features from T1, T2, FLAIR, and T1c images was assessed in internal and external validation sets by comparing probability values and actual incidence. STATISTICAL TESTS: Mann-Whitney U test, Chi-Squared test, Wilcoxon test, receiver operating curve (ROC), and area under the curve (AUC); DeLong analysis. P < 0.05 was statistically significant. RESULTS: The multiparametric radiomic model achieved AUC values for IDHmut-noncodel, IDHwt, and IDHmut-codel of 0.8181, 0.8524, and 0.8502 in internal validation set and 0.7571, 0.7779, and 0.7491 in external validation set, respectively. Multiparametric radiomic model showed significantly better diagnostic performance after DeLong analysis, especially in classifying IDHwt and IDHmut-noncodel subtypes. DATA CONCLUSION: Radiomic features from DWI could bring additive value and improve the performance of conventional MRI-based radiomic model for classifying the molecular subtypes especially IDHmut-noncodel and IDHwt of adult gliomas. TECHNICAL EFFICACY: Stage 2.

Comprehensive analysis to identify the influences of SARS-CoV-2 infections to inflammatory bowel disease.

Background: Coronavirus disease 2019 (COVID-19) and inflammatory bowel disease (IBD) are both caused by a disordered immune response and have direct and profound impacts on health care services. In this study, we implemented transcriptomic and single-cell analysis to detect common molecular and cellular intersections between COVID-19 and IBD that help understand the linkage of COVID-19 to the IBD patients. Methods: Four RNA-sequencing datasets (GSE147507, GSE126124, GSE9686 and GSE36807) from Gene Expression Omnibus (GEO) database are extracted to detect mutual differentially expressed genes (DEGs) for IBD patients with the infection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) to find shared pathways, candidate drugs, hub genes and regulatory networks. Two single-cell RNA sequencing (scRNA-eq) datasets (GSE150728, PRJCA003980) are used to analyze the immune characteristics of hub genes and the proportion of immune cell types, so as to find common immune responses between COVID-19 and IBD. Results: A total of 121 common DEGs were identified among four RNA-seq datasets, and were all involved in the functional enrichment analysis related to inflammation and immune response. Transcription factors-DEGs interactions, miRNAs-DEGs coregulatory networks, and protein-drug interactions were identified based on these datasets. Protein-protein interactions (PPIs) was built and 59 hub genes were identified. Moreover, scRNA-seq of peripheral blood monocyte cells (PBMCs) from COVID-19 patients revealed a significant increase in the proportion of CD14+ monocytes, in which 38 of 59 hub genes were highly enriched. These genes, encoding inflammatory cytokines, were also highly expressed in inflammatory macrophages (IMacrophage) of intestinal tissues of IBD patients. Conclusions: We conclude that COVID-19 may promote the progression of IBD through cytokine storms. The candidate drugs and DEGs-regulated networks may suggest effective therapeutic methods for both COVID-19 and IBD.

Pushing the Electrochemical Performance Limits of Polypyrrole Toward Stable Microelectronic Devices.

Conducting polymers have achieved remarkable attentions owing to their exclusive characteristics, for instance, electrical conductivity, high ionic conductivity, visual transparency, and mechanical tractability. Surface and nanostructure engineering of conjugated conducting polymers offers an exceptional pathway to facilitate their implementation in a variety of scientific claims, comprising energy storage and production devices, flexible and wearable optoelectronic devices. A two-step tactic to assemble high-performance polypyrrole (PPy)-based microsupercapacitor (MSC) is utilized by transforming the current collectors to suppress structural pulverization and increase the adhesion of PPy, and then electrochemical co-deposition of PPy-CNT nanostructures on rGO@Au current collectors is performed. The resulting fine patterned MSC conveyed a high areal capacitance of 65.9 mF cm-2 (at a current density of 0.1 mA cm-2), an exceptional cycling performance of retaining 79% capacitance after 10,000 charge/discharge cycles at 5 mA cm-2. Benefiting from the intermediate graphene, current collector free PPy-CNT@rGO flexible MSC is produced by a facile transfer method on a flexible substrate, which delivered an areal capacitance of 70.25 mF cm-2 at 0.1 mA cm-2 and retained 46% of the initial capacitance at a current density of 1.0 mA cm-2. The flexible MSC is utilized as a skin compatible capacitive micro-strain sensor with excellent electromechanochemical characteristics.

An Improved Synthesis Phase Unwrapping Method Based on Three-Frequency Heterodyne.

An improved three-frequency heterodyne synthesis phase unwrapping method is proposed to improve the measurement accuracy through phase difference and phase sum operations. This method can reduce the effect of noise and increase the equivalent phase frequency. According to the distribution found in the phase difference calculation process, the Otsu segmentation is introduced to judge the phase threshold. The equivalent frequency obtained from the phase sum is more than those of all projected fringe patterns. In addition, the appropriate period combinations are also studied. The simulations and related experiments demonstrate the feasibility of the proposed method and the ability to improve the accuracy of the measurement results further.

Optimization mechanism and applications of ultrafast laser machining towards highly designable 3D micro/nano structuring.

Three-dimensional (3D) micro/nano structures are significant in many applications because of their novel multi-functions and potential in high integration. As is known, the traditional methods for the processing of 3D micro/nano structures exhibit disadvantages in mass production and machining precision. Alternatively, ultrafast laser machining, as a rapid and high-power-density processing method, exhibits advantages in 3D micro/nano structuring due to its characteristics of extremely high peak power and ultra-short pulse. With the development of ultrafast laser processing for fine and complex structures, it is attracting significant interest and showing great potential in the manufacture of 3D micro/nano structures. In this review, we introduce the optimization mechanism of ultrafast laser machining in detail, such as the optimization of the repetition rate and pulse energy of the laser. Furthermore, the specific applications of 3D micro/nano structures by laser processing in the optical, electrochemical and biomedical fields are elaborated, and a valuable summary and perspective of 3D micro/nano manufacturing in these fields are provided.

Stepping Further from Coupling Tools: Development of Functional Polymers via the Biginelli Reaction.

Multicomponent reactions (MCRs) have been used to prepare polymers with appealing functions. The Biginelli reaction, one of the oldest and most famous MCRs, has sparked new scientific discoveries in polymer chemistry since 2013. Recent years have seen the Biginelli reaction stepping further from simple coupling tools; for example, the functions of the Biginelli product 3,4-dihydropyrimidin-2(1H)-(thi)ones (DHPM(T)) have been gradually exploited to develop new functional polymers. In this mini-review, we mainly summarize the recent progress of using the Biginelli reaction to identify polymers for biomedical applications. These polymers have been documented as antioxidants, anticancer agents, and bio-imaging probes. Moreover, we also provide a brief introduction to some emerging applications of the Biginelli reaction in materials and polymer science. Finally, we present our perspectives for the further development of the Biginelli reaction in polymer chemistry.

Facile preparation of a MXene-graphene oxide membrane and its voltage-gated ion transport behavior.

Two-dimensional MXenes have become a crucial topic in the field of ion transportation owing to their excellent electrochemical performance. Herein, a strategy for preparing a layered MXene-graphene oxide (GO) membrane via vacuum filtration is proposed, which endows the delaminated two-dimensional MXene-GO membrane (MGOm) with excellent electrical conductivity and chemical stability, achieving an excellent voltage-gated ion transport behavior. Owing to the presence of charges or dipoles within the membrane's channel, the movement of electrons or dipoles under the influence of membrane potential is possible. By varying the transmembrane potential, the transition between the closed and open states of the voltage-gated ion channel can be adjusted. When a negative potential is applied at osmotic pressure, the force between the charged MGOm sheet and the cation (K+) is enhanced, promoting ion permeation. Conversely, the application of positive potential attenuates electrostatic attraction, resulting in a decrease in ion permeability. In addition, the effects of MXene and GO with different modulation ratios on the voltage-gated ion transport have shown that when the modulation ratio of MXene : GO is 7 : 3, the optimal ion permeation rate is achieved. In conclusion, the conductive film with voltage-gated nanochannels is a promising alternative for ion transportation, opening up new avenues for the further exploration of MXene materials in energy storage devices.

Low-Cost In Vivo Full-Range Optical Coherence Tomography Using a Voice Coil Motor.

In this work, we demonstrated a novel and low-cost full-range optical coherence tomography (FROCT) method. In comparison with the off-pivot approach, which needs precise control of the deflecting distance and should be adjusted for different situations, our proposed method is more flexible without regulating the system itself. Different from the previous systems reported in the literature, which used a high-cost piezo-driven stage to introduce the phase modulation, our system utilizes a cost-effective voice coil motor for retrieving the complex-valued spectral signal. The complex-valued data, with a twofold increase in the accessible depth range, can be calculated using an algorithm based on the Hilbert transform and Dirac delta function. To confirm the effectivity of our method, both simulation and experiments were performed. In particular, for the in vivo experiment, we presented the FROCT result of a fingernail fold, demonstrating the availability of in vivo imaging. Since the key element of our system is a low-cost voice coil motor, which is flexible and more accessible for most of the clinics, we believe that it has great potential to be a clinical modality in the future.

Two-Step Converging Spherical Wave Diffracted at a Circular Aperture of Digital In-Line Holography.

The aspheric light emitted from a pinhole restrains the reconstruction quality of a digital in-line hologram. Herein, the Fresnel-diffracted spot from the first step converging spherical wave diffracted at a rough circular aperture is collimated and expanded to generate an even plane wave, which is converged again by an objective lens and matching a minimum aperture while the central spot is varying from light to dark. We observed that the collected background hologram is filled with a round spot with high contrast as an ideal spherical wave. The resolution board and biology experimental results demonstrated a distinctively reconstructed image without any image processing in a single exposure. The adjustable field of view and magnification, single exposure, and noncontact make it suitable for an online microscope.